Mugen Seiki USA MBX5T Prospec Truggy Kit - MUGE0030

(MUGE0030)
MSRP $ 1125.99
OUR PRICE $459.99

Quantity available: 2

 

DESCRIPTION:

This is the 1/8 scale glow powered, radio controlled,
Mugen MBX5T ProSpec Off-Road Truggy Kit.

FEATURES: Chassis: A70-75 T6 aluminum 1/8" (3mm) thick, silver in color
Drive: Four wheel shaft drive
Clutch: 3-aluminum shoes, racing type
Transmission: Single-speed
Ball Bearing: Full set included
Shocks: Four oil-filled, w/coil-over spring aluminum bodied with
3.5mm shafts and 0.20" (5mm) thick aluminum shock stays
Main Gear: 46 tooth, metal
Fuel Tank: 5.1oz (150cc), flip top cap
Gearbox: Sealed front and rear
Differentials: Three planetary geared with carbon center diff
mounting plate
Brakes: Dual disk
Tires: Proline Crime Fighter MT (PROC1121) square knobby tread
pattern with high density foam inserts
Wheels: White 5-spoke nylon construction with 17mm hex, 3.4" (86mm)
diameter, 2.2" (55mm) wide
Body: Clear truggy style with white wing
Bumpers: Front composite
Radio Plate: Carbon
Suspension: Pillow ball
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when when viewed from front or behind vehicle
Steering: Bell-crank type, with carbon graphite steering brace and
adjustable Ackerman. Ackerman describes the effect of the inside
front wheel turning tighter than the outside front wheel.
Servo Saver: Included


INCLUDES: One Mugen 1/8 scale MBX5T ProSpec truggy w/oil filled aluminum bodied
shocks, clear lexan body, tires, foam inserts, 5-spoke wheels,
13 tooth clutch bell, 46 tooth spur gear, instructions, shock oil,
wheel wrench, white wing, T-wrench, decals, air filter and window
mask


REQUIRES: Radio: 2-Channel with 2 Servos, high torque servo recommended for
steering
Radio Batteries: (8) AA size
Engine: .21-.28cu in (3.4 - 4.6cc) rear exhaust, non-pull start
Exhaust System: Muffler, manifold, and manifold spring
Paint: Polycarbonate safe for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.


SPECS: Vehicle-
Length: 22.4" (569mm)
Width: 17.4" (443mm)
Height: 7.5" (190mm)
Weight: 9 lbs (4100g) approx.
Wheelbase: 14.5"-14.7" (369mm-374mm) adjustable
Gear Ratio: 16.28:1
Tires-
Width: 3.1" (79mm)
Outer Diameter: 5.7" (145mm)
Inner Diameter: 3.2" (81mm)
Wheels-
Diameter: 3.4" (86mm)
Width: 2.2" (55mm)
Body-
Length: 20" (498mm)
Width: 8" (203mm) at widest point
6" (152mm) narrowest point, at front
Height: 5.1" (131mm)


This ProSpec version includes the following Mugen hop-ups;
B0104 Fuel Filter
E0101 Front Upper Plate
E0102 Center Diff Mount Plate
E0117 Titanium Rear Upper Arm
E0118 Rear Lower Arm Support (5mm)
E0119 Front Lower Arm Support (4mm)
E0123 Lower Arm Shaft
E0124 Rear Lower Arm Shaft S
E0126 Al. Rear Upright R/L
E0139 Al. Front Tension Rod
E0140 Al. Rear Tension Rod
E0301 Radio Plate
E0311 Servo Saver Plate
E0522 Front Damper Stay (5mm)
E0523 Rear Damper Stay (5mm)
E0703 One-Piece Engine Mount
E0818 Titanium Steering Rod 4mm
E0819 Titanium Turnbuckle Rod